10400 – COATING, STATGUARD, CONDUCTIVE EPOXY, LIGHT GREY, 4 GAL KIT

Features

• Conductive Epoxide Polymer Floor Coating

Provides a flooring surface that does not generate a static charge and will act as part of the path-to-ground for an operator wearing ESD footwear.

• Conductive (Rtt and Rtg 1 x 10⁴ to < 1 x 10⁷ ohms per ANSI/ESD S7.1 or IEC 61340-4-1)

The surface resistance range will remain low enough to act as a path-to-ground with normal dirt and grim build up on a floor and meet the required limits of ANSI/ESD S20.20 Method 1 (<3.5 x 10⁷ ohms) for a flooring/footwear system.

• One Coat, 2-part, Water-Based Epoxy System

Mix 4 gallon pre-measured part A and B together and install with squeegee and nap roller.

• 50% Solids by Volume

Reduces dry time. Estimated Coverage Per Gallon = 200 sq ft. at 8 mil (0.008" thick).

• Made in the United States of America

.

Technical Info

• TB-7039 – Statguard® Conductive Epoxy Application Instructions
• TB-7039S – Statguard® Conductive Epoxy